SigOFIT Gen 2 · MOIP100P to MOIP1000P
100 MHz to 1 GHz model options. The brochure lists up to 85 kVpk common-mode voltage range and attenuator-dependent differential measurement ranges up to ±6250 V.
Gen 2 details → · Open brochure PDFMicsig India · Vianova Industrial Solutions
Micsig Optical Isolated Probes in India
Compare Micsig SigOFIT MOIP optical-fiber isolated probes for isolated differential voltage measurements. Explore Gen 2 and Gen 3 families, model bandwidth and attenuator-dependent voltage measurement ranges.
Request product guidanceMicsig SigOFIT MOIP probes transmit the measurement signal over optical fiber, electrically isolating the probe head from the instrument. The supplied Gen 2 and Gen 3 product PDFs describe model-specific bandwidth, common-mode rejection, noise and attenuator options.
SigOFIT Gen 3 · MOIP200P to MOIP1200P
200 MHz to 1.2 GHz model options. The brochure describes attenuator-dependent differential ranges up to ±20 kV and up to 85 kV isolation voltage.
Gen 3 details → · Open brochure PDFOptically isolated probe selection
Compare the target bandwidth, differential input range, attenuator compatibility, common-mode voltage, fiber length, output interface and required noise floor. Voltage measurement range depends on the selected attenuator; it is not the same value as the isolation rating.
Up to 1.2 GHzGen 3 maximum model bandwidth
85 kVpkCommon-mode / isolation figure in supplied brochures
±0.01 V to ±20 kVGen 3 range with compatible attenuators
Universal BNCOutput interface specified in brochures
Applications and model comparison
The supplied brochures describe use in high-speed power electronics and third-generation semiconductor testing, including SiC and GaN switching measurements. Compare probe bandwidth and attenuator range against the signal you need to capture; refer to the exact MOIP model documentation for final specifications.
The measurement range depends on the attenuator and model. Do not treat the common-mode isolation voltage as the differential input range.